The sink and bathroom drain is one of the pipes that suffers the most clogs due to daily use. Food residue on dishes, detergent solidification, throwing paper or wipes, or spilling other residues such as oil can cause pipes to become clogged, causing blockages and a bad smell. Prevention is essential to avoid unwanted plugs that can lead to a greater problem and damage to the pipes.

If you want to know how to clean kitchen sink drain pipe and what practices you can carry out to avoid clogs, do not miss the following article in which we give you the best homemade and easy-to-apply tricks to remove plugs in pipes.

How to clean kitchen sink drain pipe?

The pipe storm sewer is installed during the construction of a house to relieve excess rainwater on the terraces or backyards. They are installed outside and usually have channels in the roof to direct the water to the drain. These pipes can become clogged due to the accumulation of leaves, dirt, or other debris. Find out a drain cleaning company or try these steps:

• Remove dirt around the drain and remove the guard that protects it.
• Remove the downspout from the drain that connects it to the spout.
• Insert a pipe unclog and run it as far as the pipe allows. Try the other end of the spring end that doesn’t work for you.
• Try pouring water down the drain and check that the water does not overflow.
• It may be damaged and needs to be replaced.

Next, we will tell you other easy tricks that will help you know how to unclog kitchen or bathroom pipes.

Unclog sewer pipes with water and salt

The salt mixed with the hot water not only helps to remove and wash the debris that is in the pipe with it, but it also serves to eliminate the bad smell caused by the waste stuck in the pipe. This home remedy is only effective for minor drain clogs, so it’s good to do it every now and then keep your pipes clean.

What do you need:

• 1 liter of water
• 100 grams of salt

How to do it

1. If the clog is very strong, use a suction cup to unclog pipes before applying any of this article’s methods.
   Put a pot on the fire to boil the liter of water.
2. When it reaches the boiling point, turn off the heat, add the salt and stir until it dissolves.
3. Once the salt is mixed with the water, pour the liquid over the clogged drain and work for about 30 minutes.
4. During that time, do not turn on the faucet to prevent cold water from running through the pipe.

Baking soda and vinegar

Sodium bicarbonate is one of the so-called base compounds; on the other hand, vinegar is made up of acetic acid. Mixing a base compound with acid creates a reaction known as an acid-base reaction. This reaction gives off a carbonic gas that manages to penetrate the pipe’s plug, helping to undo it. For that reason, baking soda and vinegar cleaning mixture are so widely used in the kitchen.

What do you need:

• 100 grams of baking soda (chemical yeast also works)
• 200 milliliters of white vinegar

How to do it?

1. Pour the bicarbonate into the pipe that has the clog, put a cap and let it act.
2. Meanwhile, boil the 200 ml of white vinegar in a saucepan.
3. When it has reached the boiling point, pour it over the pipe in which you have added the baking soda.
4. The union of both ingredients will create an effervescent effect that will dissolve the jam.

To be more effective, we recommend that you leave it on for a few hours and avoid pouring water into the drain pipes for at least two hours.

Yeast and vinegar

Chemical yeast has an action very similar to that of sodium bicarbonate. Together with an acid product such as vinegar, it creates an effervescent reaction that helps to drag dirt or traces of grease stuck in the drain.

What do you need:

• Half a cup of baking powder
• Half a cup of white vinegar

How to do it?

1. Add the yeast and vinegar to a container.
2. Stir until both ingredients are integrated.
3. Pour it into the clogged drain or pipe and leave for a few minutes.
4. After a few minutes, pour a pot of boiling water down the drain to dilute the fats and remove the clog.

Salt, vinegar, and baking soda

And if the jam is very strong, we leave you this remedy that combines all the ingredients of the previous remedies to help you undo the most stubborn plugs. Take note of this homemade trick and you will know how to unclog pipes without the need to use commercial products to unclog.

What do you need:

• Half a glass of baking soda
• 3 tablespoons of salt
• 1 glass of white vinegar
• 1 liter of water

How to do it

1. Mix the vinegar, salt and baking soda in a bowl.
2. Pour the mixture down the drain with the clog.
3. Leave it on for at least 20 minutes.
4. Fill a pot with water and bring it to a boil.

After 20 minutes with the product in the pipe, pour the boiling water down the drain. The action of the boiling water in contact with the rest of the ingredients will make the dirt dissolve, thus eliminating the jam.

How to keep pipes from clogging

To avoid clogs, whether, in the kitchen or bathroom plumbing, prevention is paramount. These are simple gestures that will not involve any effort and that will help ensure the good condition of the pipes and pipes and prevent bad odors.

• Before scrubbing, clean up any food left on the dishes. If we put the dishes directly in the sink, the waste will go to the drain.
• Use a protective filter cap to catch any debris that could be accidentally strained.
• Do not throw food scraps into the sink and, as much as possible, avoid the waste that can end up seeping down the drain and into the pipes.
• Do not flush papers or wipes down the toilet to avoid clogging the pipes.
• Don’t pour grease or oil into the sink or toilet, as the pipes will be greasy and dirt can stick to the walls.

Pour 4 cups of boiling water to dissolve the accumulated fat at least once a week to maintain the pipes and leave them clean.