The truth is that a good bath of very hot water, aromatic salts and some silence, with the subtle sound of water, moving from one side to another. That takes away the pain of anyone and you feel that life can follow its rhythm, without you, if necessary. The only downside would be that the bathtub was not in good condition. Hence the importance of knowing the best tips to remove stains from the bathtub.
Stains make you not want to put a foot in because you will think that fungi eat you and sometimes, no matter how much you rub, the bathtub does not have that shine and joy of yesteryear. Don’t worry. Here we show you how to remove stains from bathtub. We will teach you some efficient ways to remove stains so that you can recover your earthly paradise.
How to remove stains from bathtub?
When it comes to the best tips to remove stains from the bathtub, it is convenient to know how to differentiate the type of stain that we are going to remove. In the end, a bathtub can be dirty for many reasons and every stain has its trick. Therefore, we are going to see the best way to clean the most common stains in the bathtub.
We began the review with the hideous and outrageous rust stains. To eliminate them, just mix a little salt with the juice of a lemon. The result is a very abrasive oil, so we recommend the use of gloves to apply it.
Pour the combination on the rust stains, let it act for 5 minutes and rub gently with a cloth to remove it. You will see how the spots disappear as if by magic.
Eliminate dark stains
And from rust to the repulsive dark stains, without a doubt, the most unsightly that we can have in the bathtub. In this case, we must mix a little sodium bicarbonate and the same amount of hydrogen peroxide, until we make a paste. The result will be a very powerful homemade stain remover.
When you have it, apply the paste on the most difficult stains and let them act for at least 30 minutes. After half an hour, remove the product and with a sponge or scouring pad, rub what remains of the product, until the stain disappears.
When a bathtub has mould, it means that it has not been cleaned for a long time. Be careful. It happens a lot in summer houses or in the town, which you don’t usually go to. Humidity and a closed environment cause mould to come out faster than you might expect.
Obviously, when there is mould, the first thing we must do is a treatment for fungi, to treat the surface. When you have washed it well, spray a spray, so they do not redeposit. It is the best for the maintenance of the bathtub and, if you intend to use it, for your own skin.
When we talk about mould, it is almost more common for it to appear on the shower screens than in the bathtubs, since there are areas of the screen where water accumulates and ends up forming these stains.
Eliminate lime stains
Lime stains (which form over time) can be a bit tricky to remove from the bathtub, although it is not an impossible task. In fact, we’re going to show you up to three of the best tips for removing lime stains from your bathtub.
Lemon – First of all, apply some lemon on the stains, as we have already seen with rust stains. You must rub with the help of a cotton ball and you will notice that little by little, the stain is disappearing (in this way you will notice that for a few days any deep lime stain will no longer be).
Vinegar – On the other hand, you can also use vinegar to remove lime stains from the bathtub. You can choose to use vinegar, without more, or you can reduce it with a little water. To do this, mix 50 ml of warm white vinegar with another 50 ml of water and dip a clean cloth in the mixture. You can also pour it directly on the stain. Scrub a little and you will see how the stain will disappear.
Vinegar, water, bicarbonate and bleach – And if you add a little bicarbonate and bleach to that vinegar and water, it will be even easier to remove lime stains. Of course, we are talking about very abrasive products, so you must clean it carefully. Always wear gloves and open windows to ventilate the bathroom and the house well, without breathing on the product. Another option is that instead of bleach, add a little ammonia to the vinegar, water and bicarbonate.
How to whiten the bathtub?
Now that we know the best tips to remove stains from the bathtub, we have to give it the final touch and bring it back to the white color and shine of yesteryear. To achieve this, we are going to show you how to whiten the bathtub effectively.
Salt and vinegar
A priori, they seem unrelated ingredients but are highly complementary to this mission. As simple as taking a glass of vinegar and pouring two tablespoons of salt into it. Stir and let it sit.
The next day, use this mixture to clean the bathtub, with the help of a sprayer. As it is a very abrasive product, do not wipe the cloth with force, but rather, with a soft sponge, so that the enamel of the bathtub does not suffer. You will see that it is not necessary and that the bathtub shines with each pass you give with the sponge. In a matter of minutes, your bathtub will regain the shine it had when you first released it.
Baking soda and vinegar
The reality is that mixing baking soda and vinegar is not very pleasant. Now, the result that you will get with this explosive mixture is that of a bathtub that will look new even if it has been accumulating dirt for years.
First of all, you just have to sprinkle some baking soda on the dark or yellowish surface that you dislike. Rub lightly with a cloth, so that the baking soda is impregnated. Take some apple cider vinegar and with the help of a spray, soak the affected area. Then rinse with water and wipe dry. You will see that the shine is instantaneous.
Vinegar and hot water
The last of the bathtub whitening tricks involves something as simple as vinegar and hot water. Of course, we warn you that this method is the one that will take the longest. Now, it’s worth it for the whitening results it offers.
The first thing to do is take an empty and clean sprayer and fill it with white vinegar. Spray the entire tub with the vinegar and let it act for at least an hour.
After a time, put the cap on the bathtub and turn on the hot water tap. Let it run, ensuring that the first water (which comes out cold) falls into a bucket. As soon as it’s hot, let it cover the bathtub and all the vinegar.
Leave the full bathtub overnight and when the sun rises, empty it and scrub well with a scouring pad or sponge. Rinse well with cold water and you will see how the bathtub shines and recovers a white color that you did not even know it had.
And so, with these simple homemade tricks, you can remove stains and whiten the bathtub. A quick way to recover the bathtub, leave it pristine and ready to receive you with a hot bath.