Taking a bath is one of the most relaxing ways to unwind and relieve stress. So, it can be very tempting to slip into a bubble bath or place of hot soapy water when you’re feeling down. But, sometimes, these tubs can develop leaks! Follow this tutorial to learn how to remove the stopper from a bathtub.
What is the Stopper?
The stopper is a small metal or plastic piece located on the end of the bathtub drain. It keeps the bathtub drain open while the tub is filling with water. The stopper can become clogged over time and may need to be removed to allow the bathtub drain to properly drain. Removing the stopper can require removing some of the drain pipes from the wall.
How to Remove the Stopper from the Drain
If you constantly have to use a plunger to remove the stopper from your bathtub drain, it might be time to replace the item. Here’s how to do it:
1. Disconnect the drain tube from the bathtub faucet.
2. Locate the stopper on the drain and unscrew it with a wrench or pliers.
3. Push the old stopper off the drain and screw in the new one.
4. Connect the drain tube to the faucet and turn on the water to flush any debris.
How to Clean a Bathtub
If you are like most people, your bathtub is probably one of the busiest places in your home. With kids constantly running in and out and water spilling everywhere, it’s no surprise that your tub can quickly become dirty and cluttered. If you want to keep your bathtub looking clean and tidy, follow these simple tips:
1. Disinfect your tub every month. A good way to disinfect your tub is to use a chlorine-free bleach solution. Fill a bucket with two cups of bleach and one cup of water. Pour the solution into the bathtub and wait five minutes before scrubbing the surface with a scrub brush. This will help to kill any bacteria that may be lurking in the water.
2. Clean the tub once a week using a mild soap. Fill a bucket with six cups of warm water and add one cup of white vinegar. Soak a sponge in the soapy water and scrub the inside of the tub clean. Remove any built-up soap scum or debris before rinsing off with fresh water.
3. Keep your bathmat clean and replace it regularly. This will help prevent tracked-in dirt, but it will also prevent mildew and mold from forming on the mat.
4. Close any cracks around the tub and remove any heavy materials that could weigh it down.
Solutions for Other Bathroom Experiences
If your sink stopper is stuck and you can’t remove it, follow these simple steps:
1. Try using a plunger. Wet the plunger and insert it into the drain. Push and pull the plunger up and down to create pressure. If the stopper still doesn’t budge, try using a wrench or pliers.
2. If those methods don’t work, call a professional. A misaligned sink flange or clogged drain can cause a stopper to become stuck.
If you’re having trouble removing the stopper from a bathtub, a few tips might help. First, try placing a towel or cloth over the end of the spout to apply pressure. Try using a plunger or even your hand if that doesn’t work. Be sure to use caution and avoid getting any water inside the drain; you’ll need to call a plumber if it does get inside.